热门MCU资料下载

S3P9228

Update:2010.11.19 File Size:4MB Views:
Hits
general description
SAM88RCRI PRODUCT FAMILY
Samsung's SAM88RCRI family of 8-bit single-chip CMOS microcontrollers offer fast and efficient CPU, a wide range of integrated peripherals, and supports OTP device.
A dual address/data bus architecture and bit- or nibble-configurable I/O ports provide a flexible programming environment for applications with varied memory and I/O requirements. Timer/counters with selectable operating modes are included to support real-time operations.

S3C9228/P9228 MICROCONTROLLER
The S3C9228 can be used for dedicated control functions in a variety of applications, and is especially designed for application with FRS or etc.
The S3C9228/P9228 single-chip 8-bit microcontroller is fabricated using an advanced CMOS process. It is built around the powerful SAM88RCRI CPU core.
Stop and Idle power-down modes were implemented to reduce power consumption. To increase on-chip register space, the size of the internal register file was logically expanded. The S3C9228/P9228 has 8K-byte of program ROM, and 264-byte of RAM (including 16-byte of working register and 20-byte LCD display RAM).
Using the SAM88RCRI design approach, the following peripherals were integrated with the SAM88RCRI core:
- 7 configurable I/O ports including ports shared with segment/common drive outputs
- 10-bit programmable pins for external interrupts
- One 8-bit basic timer for oscillation stabilization and watch-dog functions
- Two 8-bit timer/counters with selectable operating modes
- Watch timer for real time
- 4 channel A/D converter
- 8-bit serial I/O interface

OTP
The S3C9228 microcontroller is also available in OTP (One Time Programmable) version. S3P9228 microcontroller has an on-chip 8K-byte one-time-programmable EPROM instead of masked ROM. The S3P9228 is comparable to S3C9228, both in function and in pin configuration.
features
  • CPU
    - SAM88RCRI CPU core
  • Memory
    - 8192 X 8 bits program memory (ROM)
    - 264 X 8 bits data memory (RAM) (Including LCD data memory)
  • Instruction Set
    - 41 instructions
    - Idle and Stop instructions added for power-down modes
  • 36 I/O Pins
    - I/O: 34 pins (44-pin QFP, 42-pin SDIP)
    - Output only: 2 pins (44-pin QFP)
  • Interrupts
    - 14 interrupt source and 1 vector
    - One interrupt level
  • 8-Bit Basic Timer
    - Watchdog timer function
    - 3 kinds of clock source
  • Two 8-Bit Timer/Counters
    - The programmable 8-bit timer/counters
    - External event counter function
    - Configurable as one 16-bit timer/counters
  • Watch Timer
    - Interval time: 3.91mS, 0.25S, 0.5S, and 1S at 32.768 kHz
    - 0.5/1/2/4 kHz Selectable buzzer output
    - Clock source generation for LCD
  • LCD Controller/Driver
    - 16 segments and 8 common terminals
    - 3, 4, and 8 common selectable
    - Internal resistor circuit for LCD bias
  • 8-bit Serial I/O Interface
    - 8-bit transmit/receive mode
    - 8-bit receive mode
    - LSB-first or MSB-first transmission selectable
    - Internal or external clock source
  • A/D Converter
    - 10-bit converter resolution
    - 50us conversion speed at 1MHz fADC clock
    - 4-channel
  • Two Power-Down Modes
    - Idle: only CPU clock stops
    - Stop: system clock and CPU clock stop
  • Oscillation Sources
    - Crystal, ceramic, or RC for main clock
    - Main clock frequency: 0.4 MHz - 8MHz
    - 32.768 kHz crystal oscillation circuit for sub clock
  • Instruction Execution Times
    - 500nS at 8MHz fx (minimum)
  • Operating Voltage Range
    - 2.0 V to 5.5 V at 0.4 - 4.2MHz
    - 2.7 V to 5.5 V at 0.4 - 8MHz
  • Operating Temperature Range
    - -25 °C to +85 °C
  • Package Type
    - 44-pin QFP, 42-pin SDIP
Development tools for MCU
Programming console for MCU
Development tools for ARM
the C compiler
Contact
Samsung SCM:

ic168@zh-ic.COM

Development Tools:

B6078S@163.com

Site suggestions:

zh-ic@163.com

  Service
 MSN