更新时间：2010.11.19 文件大小：4MB 查看次数：

点击下载

S3F8-SERIES MICROCONTROLLERS
Samsung's SAM8RC family of 8-bit single-chip CMOS microcontrollers offer a fast and efficient CPU, a wide range of integrated peripherals, and various flash memory ROM sizes.

An address/data bus architecture and a large number of bit-configurable I/O ports provide a flexible programming environment for applications with varied memory and I/O requirements. Timer/counters with selectable operating modes are included to support real-time operations.

S3F84A5 MICROCONTROLLER
The S3F84A5 single-chip CMOS microcontrollers are fabricated using the highly advanced CMOS process technology based on Samsung’s latest CPU architecture.

The S3F84A5 is a microcontroller with a 16K-byte full-flash ROM embedded.

Using a proven modular design approach, Samsung engineers have successfully developed the S3F84A5 by integrating the following peripheral modules with the powerful SAM8 RC core:

• Four configurable I/O ports (24 pins)
• Seventeen interrupt sources with seventeen vectors and eight interrupt levels
• One watchdog timer function (Basic Timer overflow)
• One 8-bit basic timer for oscillation stabilization
• Two 8-bit timer/counter with time interval, PWM, and Capture mode
  (Timer B with interval and "8+2" bit PWM mode)
• One 16-bit timer/counter with three operating modes; Interval timer, Capture and PWM mode
• Analog to digital converter with 8 input channels, integrated sample and hold circuit, event trigger to start A/D converter conversion, and 10-bit resolution.
• 8-bit Pulse width modulation, up & down counting, 6 output channels with two compare units, 3 PWM interrupt sources.
• One asynchronous UART

The S3F84A5 microcontroller is ideal for use in a wide range of home applications and motor controller (especially for E-bike) requiring simple timer/counter, ADC, PWM etc. They are currently available in 28-pin SOP and 32-pin ELP package.

• CPU
  - SAM8RC CPU core
• Memory
  - 400-byte general-purpose register (RAM)
  - 16K-byte internal multi time program memory
  Full-Flash
  √ Sector size: 128 Bytes
  √ 10 Years data retention
  √ Fast programming time:
  + Chip erase: 30ms
  + Sector erase: 10ms
  + Byte program: 20us
  √ User programmable by 'LDC' instruction
  √ Endurance: 10,000 erase/program cycles
  √ Sector(128-bytes) erase available
  √ Byte programmable
  √ External serial programming support
  √ Expandable OBP™(On board program) sector
• Oscillation Sources
  - Crystal, or ceramic for main clock (10MHz max)
  - Internal RC: 8MHz (Typ.), 0.5MHz(Typ.) in VDD=5V
  - CPU clock divider (1/1, 1/2, 1/8, 1/16)
• Instruction Set
  - 78 instructions
  - IDLE and STOP instructions added for power-down modes
• Instruction Execution Time
  - 400 ns at 10-MHz fOSC (minimum, main clock)
• Interrupts
  - 17 interrupt sources (5 external and 12 internal) with 17 vectors / 8 levels
• I/O Ports
  - Total 24 bit-programmable pins
• Basic Timer
  - One programmable 8-bit basic timer (BT) for Oscillation stabilization control
• Timers
  - One 8-bit timer/counter (Timer A) with three operating modes; Interval mode, capture mode and PWM mode
  - One 8-bit timer/counter (Timer B) with two operating mode; Interval mode, "8+2" bit PWM mode.
  - One 16-bit capture timer/counter (Timer 0) with three operating modes; Interval mode, Capture mode for pulse period or duty and PWM mode.
• PWM module
  - 8-bit PWM
  - 6 output channels with 2 compare units
  √ Complementary or Independent of output modes for each group
  √ Edge and Center Aligned waveform modes
  √ Programmable Dead-time control for Complementary mode
  - 3 interrupt sources (1 Overflow and 2 Match)
  - Clock divider: Fxx/256, Fxx/64, Fxx/8, Fxx/1.
• A/D Converter
  - 10-bit conversion resolution
  - Eight analog input channels
  - Integrated sample and hold circuitry
  - Interrupt on ADC conversion complete
  - Event trigger
• Asynchronous UART
  - Programmable baud rate generator
  - Support serial data transmit/receive operations with 8-bit, 9-bit UART
• Low Voltage Reset (LVR)
  - Low Voltage Check to make system reset
  - VLVR = 2.3V, 3.0V, 3.9V (by smart option)
• Operating Temperature Range
  - -40°C to + 85°C
• Operating Voltage Range
  - 2.0 V to 5.5 V @ 0.4 ~ 4MHz (LVR Disable)
  LVR to 5.5 V @ 0.4 ~ 4MHz (LVR Enable)
  4.5 V to 5.5 V @ 0.4 ~ 10MHz
• Smart Option
  - LVR enable/disable
  - P0.2/nRESET pin selection
  - ISP™ (On-Board Programming)
• Package Type
  - 28-pin SOP, 32-pin ELP